CUVE FD-MBT - A MIXER

FD-MBT

New product

Speidel's upright mash storage tank for the storage of fruit and grape mash in between the delivery and the processing of the mash.The robust stirring device enables you to move and homogenize. A stainless steel remover with scrapers made of vulkollan ensures the automatic release. This allows the complete release of the material / content.

Capacity: from 5,200 liters up to 29,400 liters

On demand

More info

Standard accessories

TANK TOP

  • Up to tank- ø 2,000 mm made of AISI 316 stainless steel, surface IIId (2R), marbled outside

  • From tank-ø 2,200 mm upwards made of AISI 316 stainless steel, surface IIId (2R) / IIIc (2B)

  • Ladder safety bow, lifting lugs

TANK SHELL

  • Made of AISI 304 stainless steel, surface IIId (2R), marbled outside

TANK BOTTOM

  • Up to tank-ø of 2,000 mm made of AISI 304 stainless steel, surface IIId (2R), marbled outside

  • From tank-ø of 2,200 mm upwards made of AISI 304 stainless steel, surface IIId (2R) / IIIc (2B)

  • Free-standing on welded-on box-shaped legs

FILLER NECK

  • Filler neck NW 400, located in tank top with an upright forward position (tank top with bead extrusion for complete ventilation)

  • Flap lid with vent neck NW 50 Rd 78 x 1/6"

STIRRING DEVICE / REGULATION

  • Stable stirring shaft, stirring blades for the homogenisation and release of the mash

  • Electronic control system (stainless steel control cabinet, by default arranged on right), On / Off, connection 380 V, 50 Hz

  • Stainless steel remover with scraper made of vulkollan (polyurethan) with gear motor (approx. 8 rpm), power output 3 kW up to ø 2,400 mm, electric connection on site

  • Stainless steel remover with scraper made of vulkollan with gear motor (approx. 8 rpm), power output 5,5 kW at ø 2,800 mm, electric connection on site

MANHOLE

  • 420 x 320 mm, door with bow and hand wheel with electric fuse

RACKING OUTLET

  • Reinforcing plate with drilled hole 48 mm ø (to hold flap valve Gr. 37 or weld-on thread NW 50 DIN)

MASH OUTLET

  • Welded-on neck with thread NW 125

  • Discharge height X = 420 mm

Related Products

The immersion of the marc executed by Speidel’s red wine mash plunger has been inspired by the typical manual pushing that is still practised today. Due to the low mechanic pressure the grapes are almost undamaged. This way – and despite the greatest possible extraction of the mash – a low sludge content is achieved.

On demand

Speidel's innovative "internal plunger" solves this problem once and for all. Speidel's well-tried immersion system via pneumatics is an integral part of the tank's interior, thus allowing to reduce the tank's height considerably. At a comparable total height of the tank systems 50% more capacity. Capacity: from 3,300 liters up to 29,400 liters.

On demand

FD-MÜ is an upright standing wine fermentation with a self-rotating sprinkling system . Capacity: from 3,300 liters to 29,400 liters

On demand

The tank is pressure flooder is a mash fermentation tank for pressureless applications with air impulse blast pipes for a gentle and smooth re-circulation. Capacity: from 3,300 liters up to 24,500 liters

On demand

The horizontal edition of our red wine mash fermentation tank was especially developed for low-ceilinged cellar rooms. The slow-moving wings gently immerse the marc cake piece by piece.  Capacity: 6,800 liters up to 20,000 liters

On demand